JayWink Solutions
  • Home
  • About
  • How We Work
  • Services
  • Blog
  • Contact

"The Third Degree"

“P” is for “Process” (FMEA)

6/27/2018

1 Comment

 
Picture
     To avoid confusion, I will begin with a clarification.  The full name of the document to which we refer generally as a FMEA (“fee-mah”) is Potential Failure Modes and Effects Analysis.  This is not the ‘P’ to which I refer, however.
     The title, “P” is for “Process,” is intended, first, to differentiate between a PFMEA (Process FMEA) and a DFMEA (Design FMEA).  This differentiation refers specifically to product design and manufacture, as the distinction between them blurs when discussing service delivery systems.
     Second, and the focal point of this post, is to differentiate between process and product.  Many manufacturing organizations develop product FMEAs, mistakenly identifying them as process FMEAs.
     A design FMEA analyzes the potential failures of a product’s design elements – materials, geometry, load stresses, etc.  Any feature or specification that could lead to physical failure, product malfunction, personal injury, or property damage must be thoroughly reviewed and the associated risks mitigated.  Features that encourage improper use, resulting in injury, damage, premature failure, or reduced performance also require scrutiny.
     A process FMEA analyzes the potential failures of a single manufacturing process.  Process failures can range from an aesthetic imperfection to interruption of a downstream process to premature failure in service by the end user.  The broad range of potential consequences, from minor dissatisfaction or inconvenience to serious injury or extensive property damage, dictates that a careful and thorough analysis be performed on each process utilized to manufacture and deliver a product.
     A product FMEA is a compilation of process and design information.  It depicts the sequential progression of a product through each process required for its manufacture.  If the design and process FMEAs are in place, a product FMEA may not be necessary.  It can, however, be useful as an overview to aid in technology reviews, capacity planning, or program and portfolio management.  When used for this purpose, the document consists primarily of references to separate FMEA documents.  Information unique to a product can be added, but is an uncommon requirement.  Due to the overlap of the information presented in each, the product FMEA and Process Flow Diagram (PFD) may be created as a single document.
     While the product FMEA can be helpful when used appropriately, it is important not to confuse it with a process FMEA.  The risks of doing so include:
  • A single document containing multiple process analyses quickly becomes unwieldy, limiting its use as a troubleshooting guide and training tool.
  • An unwieldy document is less likely to be properly and routinely updated and maintained, further limiting its value.
  • When the document is in use, extraneous information slows retrieval, application, review, and maintenance of the relevant portion of the record.
  • Organizing potential failure analyses by product limits knowledge sharing when similar processes are utilized in the manufacture of multiple products.  The collective knowledge and experience of all personnel supporting a process adds value to all product lines that depend on it.  Information should be collected and organized to take advantage of all that is available.

     The ideal output of a FMEA development effort is not a FMEA, a single document that attempts to be comprehensive.  Instead, a FMEA package should be created that includes a design FMEA, a number of process FMEAs, and a product FMEA or PFD.  Some process FMEAs may already exist, as well as some elements of the design FMEA.  If so, review and update them before including them in the package.

     The responsibilities within a manufacturing facility with which a well-crafted FMEA package can assist include:
  • Troubleshooting and mistake-proofing – avoid repetitive errors by documenting analysis and implementation of preventive measures
  • Training – efficiently convey extensive knowledge and experience with a process to new operations, maintenance, or engineering support personnel.
  • Product and process development – improvement opportunities and potential solutions are identified in the analysis
  • Equipment specification – requirements can be determined or refined based on potential failures
  • Quality control – frequency and severity of defects dictate inspection and other measures required (FMEAs are inputs to Control Plans)
  • Failure analysis (warranty, returns) – facilitated by pre-production review; results are fed into FMEA updates
  • Service life analysis – similar to failure analysis, but after long-term use; results can be used to improve product and process development
  • Risk management – analysis identifies risks for which mitigation is required and potential solutions
  • Safety, health, and environmental management – aspects and impacts can be identified within FMEA documentation.
 
     If your organization is not being well-served by FMEAs because they are insufficient, or simply do not exist, feel free to contact me for guidance.  Once your FMEA-development infrastructure is in place, it will add value to your operations for the life of your business.
 
Jody W. Phelps, MSc, PMP®, MBA
Principal Consultant
JayWink Solutions, LLC
jody@jaywink.com
1 Comment
uk best essay service link
9/30/2019 08:28:23

If you know the process, then you can achieve anything. People really need to learn how to trust the process. You cannot be successful at anything if you just rely on luck. We all need to follow a certain process if we want to achieve something great in this life. If you ask me, people are just really wishful at what they are trying to do. Life is about the process, that is all that I can say to you.

Reply



Leave a Reply.

    Author

    If you'd like to contribute to this blog, please email jay@jaywink.com with your suggestions.

    Archives

    August 2020
    July 2020
    June 2020
    May 2020
    April 2020
    March 2020
    February 2020
    January 2020
    December 2019
    November 2019
    October 2019
    September 2019
    August 2019
    July 2019
    June 2019
    May 2019
    April 2019
    March 2019
    February 2019
    January 2019
    June 2018
    May 2018
    April 2018
    March 2018
    February 2018
    January 2018

    Categories

    All
    Career
    Customer Service
    Economics
    Lean Operations
    Operations Consulting
    Optimal Solutions
    Product/Service Development
    Project Management
    Sustainability
    Training

    RSS Feed

    Picture
    Picture
       © JayWink Solutions,  LLC

Site powered by Weebly. Managed by SiteGround
  • Home
  • About
  • How We Work
  • Services
  • Blog
  • Contact